|
| Water Test Kit (2-test pack) |
| Adrenal Function Urine Test |
| Sulkowitch Urine (Calcium) Test |
|
|
|
Natural Nutritional Products |
|
Practitioner Registration & Log in |
|
HMT Arsenic Sensitive Kit |
|
Heavy Metals Test - Arsenic kit ("HMTS(As)")
How to Test
Contents of HMTS(As) kit
- 1 Colour strip on box of kit
- 1 Test Instruction Sheet
- 1 Large Test-tube
- 1 indicator stick (in the large test-tube cap/cover)
- 1 vial with clear cap - reagent 1 (solid content)
- 1 vial with red cap - reagent 2 (liquid content contains hydrochloric acid. Avoid any contact
with skin or eyes. Rinse immediately and contact your doctor if contact is made or esepcially if an eye splash occurs)
Storage of Heavy Metals Test - Arsenic Kit
The Arsenic Test kit should be stored in a cool place - 12C to 20C.
Preparation of Test Solutions
- Remove the the 2 vials from the large test tube
- Remove the indicator stick from the cap of the large test-tube
- In the empty large test-tube, add 8 ml. of the solution to be tested
- The solution is now ready for testing. Make sure that prior to testing, the large test-tube is secure and stable and
preferably not held by the fingers
Conducting the test
- Add content from clear-cap vial (solid reagent 1) to the large test-tube containing the solution to be tested
- Return the indicator stick back into the cap of the large test-tube. Make sure that it is only a short way in cap
- Add content of clear-cap vial (liquid reagent 2) to the large test-tube and IMMEDIATELY cover or cap the large test-tube as fumes would
be emitted by the mixed solutions. Please make sure that the reaction area of the indicator stick in the cap of the large test-tube is at least
2 cm. above the combined solutions in the large test-tube. Be careful of any foam that may be formed by the solution mixture. Please make sure that
no contact is made with the solutions in the large test tube
- Carefully shake the large test-tube every five (5) minutes for about twenty (10 - 20) minutes. This is to allow the fumes emitted by the mixed
solutions to react with the reaction area of the indicator stick
- After 30 minutes remove the indication stick from the large test-tube and dip in water for 1 second, sufficient to wet the reaction area
- Shake off any excess liquid and compare the colour of the reaction area on the indicator stick to the colour strip provided
Colour strip
The numbers indicate concentration in ppm
Arsenic is a harmful heavy metal and should be 0 for inorganic states.
Osumex Bio-Chelat is most effective in eliminating heavy metals contamination in the body
Warning
Please keep the Arsenic Test kit in a safe place out of reach of children.
Please ensure that the reaction area of the indicator stick is not touched!
After the test has been completed, the tested solution should be disposed of
safely. The best disposal method is to flush the solution in the toilet.
There should not be any contact of the contents of the Arsenic Sensitive Test kit with food.
Please wash your hands thoroughly after use.
Sample of an HMT Arsenic kit
Samples/Images of test results sent in by users
The above information is provided for general
educational purposes only. It is not intended to replace competent
health care advice received from a knowledgeable healthcare professional.
You are urged to seek healthcare advice for the treatment of any
illness or disease.
Health Canada and the FDA (USA) have not evaluated these
statements. This product is not intended to diagnose, treat, cure, or prevent
any disease.
|
|
Contents of an HMT Arsenic Sensitive kit. Please see below for a sample of the kit.
|
