|
Manganese Kit
how to test |
|
|
|
br>
HMT MANGANESE TEST KIT
Number 25 on the "periodic table" of elements
Tests the presence of ions of manganese to a high degree of accuracy to
detect contamination in the body and on a wide range of materials in your environment
How to Test
Preparation of Test Solutions
- Remove the 3 vials from the large test tube.
- Pour 10 ml. of the sample solution to be tested into the large test tube.
- The solution is now ready to be tested
Conducting the test
- Add all the liquid content in the blue cap vial (reagent 1) to the sample solution in the large test tube
- Mix the solutions in the large test tube by tilting it up and down or rolling it. Do not shake the test tube
- Add all the liquid solution in the clear cap vial (reagent 2) to the solutions in the large test tube
- Mix the solutions in the large test tube by tilting it up and down or rolling it. Do not shake the test tube
- Wait 2 minutes then add the liquid solution in the red cap vial (reagent 3) to the solutions in the large test tube
- Mix the solutions in the large test tube by tilting it up and down or rolling it. Do not shake the test tube
- Wait 2 minutes and check the resultant colour of the solution in the test tube to the colour chart provided on the box.
Interference - The presence of the following metals may interfer and affect the result:
Chromium (III) above 0.1ppm; chromium (II) above 10ppm, iron, nickel, silver and copper all above 50ppm
Colour strip
The numbers indicate concentration in ppm
 
Sample of a HMT Manganese Test kit
The above information is provided for general
educational purposes only. It is not intended to replace competent
health care advice received from a knowledgeable healthcare professional.
You are urged to seek healthcare advice for the treatment of any
illness or disease.
Health Canada and the FDA (USA) have not evaluated these
statements. This product is not intended to diagnose, treat, cure, or prevent
any disease.
|
